Align the CP-1124's docking connector with the cradle connector on the left side of the PTC (see the figure above). Note: Make sure the connector pod's keyboard port is near the top of ...

... Docking the SIRIUS Radio Place the SIRIUS radio into the home dock, aligning the connector on the radio with the conn ector on the home dock, and gently press the radio down ...

Dock the computer by aligning the dock connector on your computer with the dock connector on the APR and attaching the two. NOTE: For instructions, see your Advanced Port Replicator ...

... connector from your computer before you attach the X4 UltraBase Dock. The AC adapter connector will ... Note: Make sure that the guides of the X4 UltraBase Dock align with the holes of ...

Dock the computer by aligning the dock connector on your computer with the dock connector on the APR and attaching the two. For instructions, see your Advanced Port ...

Set power to OFF (O) at rear of docking station. 2. Remove Motherboard Tray. ... Align the connectors on the module with the connectors on the motherboard and press together.

... test the write and read speeds of the drive in the dock. ... to facilitate removal while protecting the connectors from ... is also a spring-loaded plastic piece that helps align ...

... ExpressCard and is inserted with the card connector into a 54mm ExpressCard slot. Carefully align ... new device, do not force the cable connector into the port on the docking station.

... from a docking mechanism developed over a decade ago, the autonomous docking system allows a high degree of tolerance and is very forgiving when aligning servicing connectors and ...

2 docking posts: Align and secure the computer for proper connection to the docking station: Docking connector: Connects the computer to the docking station