Attach the media caddy to the rest of the media dock by aligning the connector pins carefully and easing the two sides together. Only gently pressure should be required. 7.

For example, Nilsson [1] has designed a 2D self-aligning docking device but it is still an ... Their docking connector has a forklift and a receptacle and allows approximately 30-degree ...

... When the adapter has been installed you can place your Stiletto into the dock, aligning the connectors on the radio with the connectors in the Executive Sound System dock (Figure 7).

... www.iphonealley.com/images/storyimages/july08/diydock1.png" align="right"/> Wish you had a dock ... did was take pliers, bend the 2 sides off of the original dock so now the connector ...

... modular Power Dock connector system is a board-to-board interconnect that offers vertical/right-angle board orientations, up to three separate power-mating sequences, self-aligning ...

... the computer for proper connection to <br> the docking station<br>* Docking connector connects the computer to the docking station<br>* Vertical alignment marker helps user align ...

... orientation - this has mechanical advantages - the dock connectors ... relates to techniques for mechanically supporting and aligning the portable electronic device with the docking ...

With the handset tilted slightly out of the Docking Station, align the bottom edge of the handset with the interface connector in the Docking Station. 4.

Align the left side of the computer with the guide on the left side of the ThinkPad X4 Dock, making sure that the docking connector on the bottom of your computer and that on the ...

0007] To connect a portable device (not shown) with the docking station, the user simply needs to align the connector of the docking station with the communication ...